香蕉视播

Welcome to Shandong Lugang Machinery Manufacturing Technology Co., Ltd., we will serve you wholeheartedly! /   Website map   /  contact us    Online Message

with quality To survive reputation Seeking development

    30 years' focus on casting products

National service hotline of wood crusher:

0543-4816555

Your location: home page  >  Information Center  >  Company news

Regular maintenance of chip machine

Release time: 2021-05-07

Number of visits: one thousand one hundred and sixty-two

 

Wood chip machine as a wood processing commonly used mechanical equipment, in our daily life or more common. After a long time of use, some problems will appear, which may affect the normal work of the chip machine equipment. Now we will learn how to correctly use the chip machine equipment and make it play a normal work efficiency. The following are some suggestions given by chip machine manufacturers:

 Chip machine Shandong Lugang Machinery Manufacturing Technology Co., Ltd



1. After the chip machine stops feeding, the hot blast stove continues to supply hot air to the system for 20min, so as to dry the internal components of the dust collector.

2. Close the inlet and outlet valves of the dust remover immediately after the air is stopped to prevent the invasion of cold air. It is necessary to use the dust collector for maintenance.

3. Check the large film in the pulse valve for 1-2 times, and replace the damaged and aged film in time.

4. Two pole rapping and ash discharging shall be stopped half an hour before the chip machine stops feeding, and the ash hopper shall keep a certain height of dust.

5. Regularly check the grease in the oil tank of the fan reducer motor and make up for it in time.

6. Clean the air pump filter of wood chip machine once every half a month to ensure smooth gas path.

7. If the fault is found, stop the machine in time, find out the cause and reuse it after repair.

8. Open the inspection door of the chip machine frequently to check whether the filter bags are normal and whether there is too much powder on the surface, and find out the causes and eliminate the faults.


9. Add grease to the bearing of air pump of wood chip machine once a year and replace it once a year.


10. Keep the surface of pulse controller clean.


The chip machine is mainly used to cut various types of wood chips. We will use its working principle when necessary, so as to ensure the normal operation of the equipment in the later stage. In the process of using, we must pay more attention to the regular maintenance of the wood chip machine equipment. In the operation of the equipment, we should pay attention to observation, find problems and solve them in time to avoid unnecessary trouble, Affect the normal operation of the equipment, Also need to be in accordance with the relevant provisions of the correct maintenance and adjustment, secondly, when we check the interior of the product, we must have an understanding of its internal parts, know what material it is, what role, so that it can be easily replaced on a regular basis. In short, I hope you can master certain maintenance skills.


Therefore, in the process of using the chip machine, pay attention to observe the operation of the chip machine, find problems and solve them in time to avoid unnecessary trouble. Regular maintenance and maintenance can also check out other problems existing in the chip machine, so as to timely update and replace parts, so as to extend the service life of the chip machine.



Information Center /NEWS

National Service Hotline:

0543-4816555